Winnebago & Sprinter Builds ceramic coating on the Gold Coast
Big surface area, big washdown savings.
Motorhomes have more exterior surface than anything else we coat except a boat. That's exactly why coating pays off here — every wash is faster, every trip is easier to clean up after.
What Winnebago & Sprinter Builds paint is actually like
Mixed construction — painted cab panels, fibreglass or composite body sections, large expanses of moulded plastic and awning hardware. Each needs matched products.
What we see most on Winnebago & Sprinter Buildss
Cab-to-body mismatch
The painted cab and the composite body weather at different rates and end up visibly different in colour and gloss.
Roof oxidation
The roof takes the most UV and is the least often cleaned — usually the worst surface on the vehicle.
Black streaking down sides
Roof run-off staining is universal on motorhomes without protection.
Awning and hardware staining
Awning cases, ladders and vents corrode and stain surrounding surfaces.
How we prep a Winnebago & Sprinter Builds before coating
Preparation is the job. The coating is the last hour of it.
- 1
Full inspection under LED and swirl-finder lighting, with paint depth readings recorded panel by panel.
- 2
Two-bucket hand wash, wheels and arches degreased, badges and shuts cleaned out.
- 3
Chemical iron and industrial fallout removal, then a clay treatment to lift bonded contamination.
- 4
Tape-up of trim, rubbers and sensitive edges before any machine work.
- 5
Roof accessed and treated properly — usually the most oxidised surface on the vehicle.
- 6
Cab paint and body composite corrected separately with products matched to each substrate.
- 7
Fireball Silla+ applied across the body, with automotive coating on the painted cab.
- 8
Panel wipe with a coating-safe solvent to strip polishing oils and reveal the true finish.
- 9
Fireball ceramic coating applied by hand, levelled panel by panel under controlled lighting.
- 10
IR / controlled cure, then a final inspection and handover pack with aftercare instructions.
Get a quote for your Winnebago & Sprinter Builds.
Tell us the model, colour and condition and we'll come back with the right preparation and coating plan for Winnebago & Sprinter Builds paint. Inspections are done at our Gold Coast workshop — no obligation.
- 0478 920 170
- gcpolishing@gmail.com
- 5 Suncrest Ct, Parkwood QLD 4214