Polestar ceramic coating on the Gold Coast
Scandinavian finish quality, worth doing properly.
Polestar paint quality is a step above most EVs — flatter, more consistent and harder. That means correction takes longer, and the corrected result is genuinely striking.
What Polestar paint is actually like
Harder Volvo-derived clear coat with good film build and low orange peel. Snow, Thunder and Magnesium are the finishes we see most.
What we see most on Polestars
Wash swirls on Thunder and Space
The darker greys and blacks show marring under direct light despite the harder clear coat.
Harder clear coat correction
Defects need proper compounding — a light polish won't clear them.
Large glass area
Panoramic roofs load the cabin with heat and drain range through air-con use.
Front-end chipping
Low front bumpers and highway kilometres mean stone chipping on the leading edges.
How we prep a Polestar before coating
Preparation is the job. The coating is the last hour of it.
- 1
Full inspection under LED and swirl-finder lighting, with paint depth readings recorded panel by panel.
- 2
Two-bucket hand wash, wheels and arches degreased, badges and shuts cleaned out.
- 3
Chemical iron and industrial fallout removal, then a clay treatment to lift bonded contamination.
- 4
Tape-up of trim, rubbers and sensitive edges before any machine work.
- 5
Test spot per colour to dial in the correct cutting combination for the harder clear coat.
- 6
Two-stage compound-and-refine on dark finishes for a genuinely flat, haze-free result.
- 7
Panel wipe with a coating-safe solvent to strip polishing oils and reveal the true finish.
- 8
Fireball ceramic coating applied by hand, levelled panel by panel under controlled lighting.
- 9
IR / controlled cure, then a final inspection and handover pack with aftercare instructions.
Get a quote for your Polestar.
Tell us the model, colour and condition and we'll come back with the right preparation and coating plan for Polestar paint. Inspections are done at our Gold Coast workshop — no obligation.
- 0478 920 170
- gcpolishing@gmail.com
- 5 Suncrest Ct, Parkwood QLD 4214